Friday, February 1, 2013

IIGS Monitor - A2M6014X - Replacement


It wasn't until my last working IIGS Monitor died that I went looking for alternate solutions. In the meantime a composite monitor would suffice but for the long term an RGB solution was certainly needed. It's times like these that you consider the thought that you can never have too many spares.

I have included here a summary of links to several solutions. Each solution works in varying degrees compared to the original. To obtain an alternate solution the cost in time and money will greatly depend on what other resource you already have or can get a hold of easily.

RGB to RGB
    http://apple2.org.za/gswv/a2zine/faqs/Csa2MONITOR.html#015
    http://vintageware.orconhosting.net.nz/apple2/scart.html
    http://www.jomac.net.au/parts.htm (Universal Replacement Chassis for arcade monitors)

RGB to YPbPr (Component).
    http://damntechnology.blogspot.com.au/2008/08/apple-iigs-rgb-video-to-component.html
    http://tulip-house.ddo.jp/DIGITAL/ANALOG_RGB_COMPONENT/english.html

RGB to VGA
    http://www.maricondo.org/
    http://noboot.com/charlie/cbnotesgs2.htm
    http://www.ebay.com.au/sch/i.html?_odkw=RGB+to+VGA+HD&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.XRGB+CGA+EGA+to+VGA+HD&_nkw=RGB+CGA+EGA+to+VGA+HD&_sacat=0

RGB to all of the above.
    http://www.vintage-computer.com/vcforum/showthread.php?34785-Using-an-LCD-monitor-on-a-IIGS

After checking out the available options I decided that the best solution for me was to get a replacement monitor. Some solutions came close but nothing gives a picture that is as good as the original. I'm also used to having a monitor that looks like it goes with the other parts of the system, especially when it's on display. Being in Australia and needing the 240 volt version (A2M6014X), it was going to be very difficult to track down. These monitors don't come up for sale very often so while I keep my eyes out for a replacement I was going to try and repair the ones I already had.

The first thing to do was to get hold of some schematics. The closest I could come up with where the ones for the 110 volt model (A2M6014). The schematics are available from here :- http://apple2.info/downloads

I removed the monitor casing and the only circuit board that I had a clear view of both sides was the power supply. This was the section I was mostly concerned about so it was a good starting point. I compared the schematics and to my surprise I was able to follow along quite nicely. I was able to see where the 110 volt parts where meant to go because the circuit board had been designed for both 110 and 240 volt systems. The relevant parts were populated and the alternate power parts were missing but there was room for them on the board and the vias were there too. I quickly realised that the diagnostics and repair was beyond my current skill level. However I now had greater confidence in the possibility of getting it repaired. I wasn't going to pull the monitor apart any further so I don't know if the rest of the schematics matched my setup but I figured it would be pretty close.

I set about finding someone who was able to repair the units. My first thought was to find a TV repairer. All the ones that I contacted were not interested in repairing my devices. I did however manage to track down a repairer who specialised in arcade machines and he was located only a few suburbs away. His website is :- http://members.optusnet.com.au/~paul_ridgway/
He was keen on giving it a go. I supplied him with two faulty monitors, the A2M6014 schematics, a IIGS and instructions on how to perform a diagnostic self test (this displays a test pattern). I was hoping that, from the two faulty ones, he could get at least one monitor up and going. He blew my expectations out of the water when he informed me he had fixed both. He also had the pleasure in telling me that these monitors were designed to be worked on, the circuitry was straight forward and all the parts were still readily available or easily replaced with compatible components.

This was fantastic news. Now I'm back to where I wanted to be. However, I'm not ruling out the possibility that I'll find and use a great alternate solution some day.


Power supply board showing the space for alternate power components and a IIGS Monitor showing the self-test.


Update: 5th January 2015.

I was asked to help convert one of these monitors from a 110 to a 240 volt version. I took apart my monitor and documented the differences between it and the schematics that I had of a 110 volt model. I suspect it's just the power board that needs converting. Here are the details of what I could make out.





4 comments:

Tomeu Capó said...

Hi

I interested with convert 110 to 220 vac my RGB Apple IIgs monitor as your schemas but i looked on two modified schematic, and there are some interrogant components.

Thanks

Lukazi said...

Hi Tomeu,

It is difficult to determine the value on some of the components because of the poor labelling. That's why I took several photos (top and bottom of the PCB). You could try searching for circuit diagrams containing the STR54041. My guess is that the values would not be all that critical (for the remaining unknown ones). This is the best information that I currently have. I have tried contacting several people but I have never been able to reach anyone who has done the conversion.

Cheers,
Alex.

Tomeu Capó said...

Hi Alex

I have 110v model monitor but don't start correctly, powerup listen sync sound but led don't start up and don't appears any image. Any suggestions?

Thanks

Lukazi said...

Hi Tomeu,

Sorry but I don't have the experience or the right tools to diagnose monitor issues. You could try asking the question on a few forums. I use a local arcade repair guy whenever I have issues with my monitors.

Cheers,
Alex.